sensor Tag
DS18B20 Probe
Waterproof DS18B20 1-Wire temperature probe Connector bare wire Cable Length 1 meters Measurement Range 5 - 60 °C (41 - 150 °F) Materials Stainless steel shell Response time 750 ms/reading
from $15.00
Weatherproof SHT30
Measure temperature and humidity with a Sensiron SHT30 sensor in weatherproof housing
$25.00
Thermowell Temperature Sensor
A DS18B20 1-Wire digital temperature sensor housed in a 1 inch NPT threaded stainless steel thermowell Connector bare wire Cable Length 1 meters Measurement Range 5 - 60 °C (41 - 150 °F) Dimensions 1 inch NPT threaded body Materials Stainless steel shell Response time 750 ms/reading
$20.00
Mod-EC
Add the ability to measure EC to your custom hardware application with a fully digital I2C interface Specifications 💬 Interface I²C 🎯 Accuracy ±0.01 mS/cm in a range of 0.1 mS/cm to 1 mS/cm ±0.1 mS/cm in a range of 1 mS/cm to 10 mS/cm temperature compensated ↕️ Calibration single, double, triple point routines on-chip ⚡ Voltage 3.3v ⏱️ Time 750 ms/reading Development Developer page for Arduino, Raspberry Pi, and Home Assistant/ESPHome example code and wiring Options Pins pre-soldered pins for use in a breadboard Castellations for use in a custom-made board to permanently mount the module
from $35.00
Mod-pH
Add the ability to measure pH to your hardware application with a fully digital I2C interface Specifications 💬 Interface I²C 🎯 Accuracy ±0.005 pH over the entire pH range of 0-14 pH temperature compensated ↕️ Calibration single, double, and triple point routines on-chip ⚡ Voltage 3.3v ⏱️ Time 750 ms/reading Development Developer page for Arduino, Raspberry Pi, and Home Assistant/ESPHome example code and wiring Options Pins pre-soldered pins for use in a breadboard Castellations for use in a custom-made board to permanently mount the module
from $35.00
Mod-ORP
Add the ability to measure ORP to your hardware application with a fully digital I2C interface Specifications 💬 Interface I²C 🎯 Accuracy ±0.1 mV between -2230 to 2230 mV ↕️ Calibration single-point routine on-chip ⚡ Voltage 3.3v ⏱️ Time 750 ms/reading Development Developer page for Arduino, Raspberry Pi, and Home Assistant/ESPHome example code and wiring Options Pins pre-soldered pins for use in a breadboard Castellations for use in a custom-made board to permanently mount the module
from $35.00
Mod-NTC
Add the ability to measure a 10K NTC temperature sensor to your hardware application with a fully digital I2C interface Specifications 💬 Interface I²C 🎯 Accuracy Resolution 0.125 °C no self-heating error ↕️ Calibration Configurable beta calibration ⚡ Voltage 3.3v ⏱️ Time 150 ms/reading Development Developer page for Arduino, Raspberry Pi, and Home Assistant/ESPHome example code and wiring Options Pins pre-soldered pins for use in a breadboard Castellations for use in a custom-made board to permanently mount the module
from $30.00
Waterproof 10K NTC
A waterproof 10K NTC temperature sensor. Accurate to within ±1% for ranges between -40 to 105 °C. Datasheet
from $12.00
Weatherproof SHT30
Measure temperature and humidity with a Sensiron SHT30 sensor in weatherproof housing Connector bare wire Cable Length 1 meters Measurement Range ±0.3% °C temperature accuracy from 0°C to 65°C ±3% RH humidity accuracy from 0 to 100% Materials Epoxy-sealed electronics Sintered-mesh enclosure for weatherproofing
$25.00